Can't figure out how to get backup vs. RHP to work properly

Owner to Owner help and advice
Post Reply
allenciox
Posts: 77
Joined: Sat Sep 30, 2017 7:57 pm

Can't figure out how to get backup vs. RHP to work properly

Post by allenciox »

So this is how my backups vs. RHP looked:

Position 1st Backup 2nd Backup 3rd Backup Fill Order
2B Nash 5
3B Riley Nash 1
SS Riley Seerey Jones 2
...
CF Almada Morse 1

Now, Seerey is my starting CF, Heise is my starting 3B, and Pashnick is my starting SS, while Jones is my starting 1B. On a game where both Heise and
Pashnick are tired, I would expect that Riley would start at 3B, Seerey would move to SS, and then Almada would be put in at CF.

Instead, the game puts Nash at SS who isn't even in my backup list at SS (and is rated F at SS). What am I doing wrong, and how do I remedy that... as my SS and 3B will both be out in the same game every 8 games due to having same health stat.

Thanks for assistance!
WillyD
Posts: 5098
Joined: Sat Sep 30, 2017 12:29 pm
Location: New England

Re: Can't figure out how to get backup vs. RHP to work properly

Post by WillyD »

Seerey will never move to SS because the CF priority is 1, and the SS is 2. You should only assign 1 number once. Another words you should use 1-8 once each.

In order to remedy the 3B and SS missing the same game all the time, you'll need to manually sit one of them for a game, and then stick them back in the lineup again right before the next game runs.
Post Reply

Return to “Baseball Game Questions”